Contact Us
- No.1 Doubei Industrial Zone, Sunsong Line, Haixi Town, Pingyang County, Wenzhou City, Zhejiang Province
- wzlander@vip.163.com
- +8615258468950
-
10/Mar
2022
Pay attention to the correct use of rebar bending machine
Profile rebar bending machines can be divided into two types: horizontal and vertical. It can also be divided into up-regulation and down-regulation according to the arrangement o
-
09/Mar
2022
Principle of vertical and bedroom steel bar cutting machine
Rebar cutters are used to cut rebar. Generally speaking, there are fully active rebar cutters and semi-active rebar cutters. It is one of the indispensable equipment for bar proce
-
08/Mar
2022
Precautions for the operation of steel bar cutting machine
The working surface for picking up the material must be flush with the bottom of the tool, and the length of the working table can be determined according to the length of the mate
-
07/Mar
2022
Safety operation rules of steel bar cutting machine
Before use, please check whether the blade is cracked and whether the blade fixing screw is tightened. Are the guardrails on the side of the pulley and the protective cover of the
-
06/Mar
2022
Solution to the feeding failure of the steel bar straightening machine
The normal operation of the steel bar straightening machine is realized by the support of each part. If there is a problem with a particular part, the device will fail accordingly
-
05/Mar
2022
Maintenance points of steel bar straightening machine
The friction between the parts of the steel bar straightener increases, causing considerable losses. So remember to lubricate the rotating parts before starting each rebar straight
-
04/Mar
2022
Preparatory work before use of steel bar straightening machine
Before starting the steel bar straightening machine, the push-pull speed should be determined according to the actual situation of the automatic steel bar straightening machine.
-
03/Mar
2022
Requirements for the accuracy of using a steel bar straightening machine
The moving parts of the steel bar straightening machine (tool holder, worktable, etc.) move along the guide rails of the basic parts such as the bed, pillars, and beams.
-
02/Mar
2022
Steel bar bending machine has outstanding advantages
One of the great advantages of a rebar bending machine is that the edges of the sheet metal can be pre-bent with a small remaining ruler. There is no need to use additional equipme
-
01/Mar
2022
How to choose a better steel bending machine?
There are two types of steel bending machines: mechanical and hydraulic. Mechanical steel bending machines are divided into symmetrical and asymmetrical types.