Many industrial operations use steel bar cutting machines. This kind of cutting machine is very common in the market. The price of steel bar cutting machines is also different. The price of each brand and each region is different. Generally, it is about 30,000 yuan. Yuan or so. When using this kind of machine, there are many requirements, the following is a brief introduction for everyone.
Many people are very interested in the price of steel bar cutting machine. In fact, these can be found in Baidu, Taobao and other places. In fact, it should be noted that when using this kind of cutting machine, it is necessary to ensure that there should be enough steel bars around the cutting machine. Stacking site; rotating parts should have protective covers. Check the blade for cracks and whether the blade fixing screws are tight. It is not allowed to hold the two ends of the steel bar with both hands to cut, but only to hold the steel bar on the side near the side; when working, hold the steel bar with both hands and aim at the knife edge. Press down the steel bar to prevent the tail end from lifting and hurting people; it is forbidden to cut the steel bar with a diameter exceeding the mechanical specification and the red-burning steel bar. When multiple steel bars are cut at the same time, the cross-section of the steel bar must be converted, and the blade must be adjusted in time to prevent accidents; cut low alloys When rebar, high hardness blade should be replaced.
When cutting short materials, the length of one end of the hand should not be less than 40 cm, and the distance between the hand close to the blade and the blade should be kept more than 15 cm. When cutting long steel bars, there should be a special person to help the steel bars. During the operation of the machine, it is strictly forbidden to clean up the sundries near the knife edge by hand, and it is forbidden for idle personnel to stay on the site. If the blade is abnormally skewed, it should be powered off immediately for maintenance. For those who want to buy, in addition to understanding the price of the steel bar cutting machine, it is the most important to understand its working requirements.
