Rebar cutting machine is an important cutting machine. Do you know what to do if your rebar cutter has symptoms like a transmission oil leak? How to deal with oil leakage of vertical steel bar cutting machine gearbox?
Reasons for oil leakage of steel bar cutting machine gearbox:
1. At present, the sales of steel bar cutting machines are mainly online, so we cannot provide the most reliable relevant information, and customers do not have much time to visit and understand, so their ideas and budgets are limited, so they bought inferior steel bar cutting machines. , so it goes wrong.
2. Well-made steel bar cutting machine and ordinary steel bar cutting machine, both in material and design, are excellent. The band saw design is ridiculous as many manufacturers are mostly knockoffs. If the exhaust port is not designed or is too small, it will cause an imbalance of internal and external pressures and smooth oil leakage.
3. The manufacturing design of the steel bar cutting machine does not meet the requirements, and the precision of the joint surface of the box is not enough, resulting in loose seals and oil leakage.
4. Improper operation and maintenance will cause multiple blockages, excessive internal pressure, excessive oil volume, high oil level, loose connecting bolts, and the separation surface of the box will not be tight.
In order to prevent oil leakage, the design needs to be improved, and ventilation equipment is installed on the inspection hole cover and oil filling hole cover of the steel bar cutting machine to ensure the balance of pressure inside and outside the box and the air flow is smooth, and the treatment is improved. The surface of the box and the accuracy of each mating surface, and avoid the box. In addition, if the main body is deformed, it is necessary to carry out sufficient maintenance work, check and clear the exhaust holes, optimize the oil quantity, and repair the dividing surface where the steel bars cut off the main body of the chassis. If the deformation is serious, replace it, clean the return tank, and tighten the bolts.
