Daily maintenance items of Hydraulic Punching Machine ( 5 )

13. When lifting materials and workpieces, it is strictly forbidden to collide with the equipment or pass above the equipment.

14. The movement of the workpiece depends on the guide rail and the lead screw to ensure the positioning accuracy. Care should be taken to keep it clean and prevent foreign objects from falling on it to cause blockage.

15. The oil injection hole of the mold base, the oil injection hole at the slider and the moving parts should be cleaned before each start. The guide rail surface and the lead screw of the punching machine should be oiled once per shift, and the iron filings on the sliding surface should be blown off with an air gun every shift. or grease.